HP XP20000/XP24000 Panduan Konfigurasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 46 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

Halaman Cetak
HP XP20000/XP24000 Panduan Konfigurasi
Figure 2 Point-to-point fabric topology example
.
Table 2 Fabric topology settings
Fabric parameter
ON
OFF
ON
OFF

Installing and configuring the host

This section explains how to install and configure Fibre Channel adapters (FCAs) that connect the
host to the disk array.

Loading the operating system and software

Follow the manufacturer's instructions to load the operating system and software onto the host. Load
all OS patches and configuration utilities supported by HP and the FCA manufacturer.

Installing and configuring the FCAs

Install and configure the FCA driver software and setup utilities according to the manufacturer's
instructions. Configuration settings specific to the XP array differ depending on the manufacturer.
Specific configuration information is detailed below.

WWN

The FCA configuration process might require you to enter the WWN for the array port(s) to which
the FCA connects. Your HP representative can provide you this information or you can display this
information on the SAN switch.
Connection parameter
FC-AL
FC-AL
POINT-TO-POINT
POINT-TO-POINT
XP Disk Array Configuration Guide: Solaris
Provides
Legacy support only (FL-port (public loop) for
loop connection to a switch)
NL-port (private arbitrated loop) for direct
connect
F-port (fabric port) for connection to a switch
Not supported
15