HP XP20000/XP24000 Panduan Konfigurasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 46 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

Halaman Cetak

1 Installing and configuring Solaris for the

XP family of disk arrays

You and the HP service representative each play a role in installation. The HP service representative

is responsible for installing the disk array and formatting the disk devices. You are responsible for

configuring the host server for the new devices with assistance from the HP service representative.

Features and requirements

The disk array has the following features:

Storage capacity: The storage capacity for each model is listed below:

Model

XP24000

XP20000

XP12000

XP10000

SVS 200

Server support: Sun servers (SPARC and x86), FSC servers, HP servers (x86). Check with your HP

representative for the servers and Fibre Channel adapters supported by your disk arrays.

Operating system support: For supported disk array microcode and OS versions, see the HP

SPOCK website:

Before installing the disk array, ensure the following requirements are met:

Volume Manager: Solaris Volume Manager or Veritas Volume Manager.

Sun SAN software: For Solaris 8/9 (if not using Emulex, Qlogic, or JNI drivers), latest SAN

Foundation Software with current patches. For Solaris 10 (if not using Emulex, or Qlogic drivers),

latest SAN (Leadville driver stack) with current patches.

Sun StorEdge Traffic Manager/Sun Storage Multipathing requires that you configure /kernel/drv/sc-

si_vhci.conf.

For Solaris 8/9 SAN information, refer to Sun StorEdge SAN Foundation Software & Installation

Guide and Sun StorEdge Traffic Manager Software Installation and Configuration Guide at

/www.sun.com.

For Solaris 10 and later SAN information, refer to Solaris Fibre Channel and Storage Multipathing

Administration Guide at http://docs.sun.com.

Fibre Channel Adapters (FCAs): Install FCAs and all utilities and drivers. Refer to the adapter doc-

umentation for installation details.

Maximum drives

Maximum Capacity

1152

2.26 PB

240

472 TB

1152

454 TB

240

94.5 TB

External

124 TB

http://spock.corp.hp.com

Maximum FC ports

224 4GB or 24 8GB

48 4GB or 24 8GB

224 4GB

48 4GB

XP Disk Array Configuration Guide: Solaris

http:/