HP XP20000/XP24000 Panduan Konfigurasi - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 34 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

HP Scalable NAS can use either one or three membership partitions, but to ensure that a membership

partition is always available, we strongly recommend that you use three membership partitions.

HP recommends that you create three LUNs for the membership partitions. Each LUN should be a

minimum of 1 GB in size.

Snapshots

Snapshots are not currently integrated into the HP Scalable NAS software for Windows.

When the LUNs have been presented to all nodes in the cluster, import them into the cluster using the

GUI or the mx command. After the disks are imported, and you have put a partition table on them as

described previously, you can then use them to create dynamic volumes and file systems, mount them

on the cluster nodes, and assign drive letters or junction points.

For details on importing and deporting disks, dynamic volume creation and configuration, and file

system creation and configuration, see the HP StorageWorks Scalable NAS File Serving Software

Administration Guide .

HP Cluster Gateway deployments