HP XP20000/XP24000 Panduan Konfigurasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 34 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

HP XP20000/XP24000 Panduan Konfigurasi
SNMP properties are usually set from the SVP but they can also be set remotely using P9000 or XP
Command View Advanced Edition Software or XP Remote Web Console. For specific procedures,
see the applicable user guide.
Figure 1 SNMP configuration
.

RAID Manager command devices

HP StorageWorks P9000 RAID Manager Software manages HP StorageWorks XP Business Copy
Software or HP StorageWorks XP Continuous Access Software operations from a host server. To use
RAID Manager, you must designate at least one LDEV as a command device. This can be done with
P9000 or XP Command View Advanced Edition Software or Remote Web Console. For information
about how to designate a command device, see the applicable user guide.
Creating scripts to configure all devices at once may save you considerable time.

Installation roadmap

Perform these actions to install and configure the disk array:
1.

Installing and configuring the disk array

Defining the paths
Setting the host mode and host group mode
Setting the system option modes
Configuring the Fibre Channel ports
2.
Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs
Fabric zoning and LUN security
3.
Connecting the disk array
Verifying the host recognizes array devices
4.
Configure disk devices
Writing signatures
Creating and formatting disk partitions
Verifying file system operations
Installing and configuring the disk array
The HP service representative performs these tasks:
XP Disk Array Configuration Guide: Windows
9