HP Xw460c - ProLiant - Blade Workstation Ikhtisar - Halaman 23

Jelajahi secara online atau unduh pdf Ikhtisar untuk Beralih HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 halaman. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Juga untuk HP Xw460c - ProLiant - Blade Workstation: Panduan Pelaksanaan (35 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Panduan Instalasi (2 halaman), Panduan Pertanyaan yang Sering Diajukan (14 halaman), Poster Pengaturan (9 halaman), Panduan Instalasi (33 halaman), Panduan Manajemen (28 halaman), Manual Perangkat Keras (23 halaman), Panduan Pengguna (33 halaman), Panduan Pengoptimalan (13 halaman), Garansi Terbatas (10 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Petunjuk Instalasi (8 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman)

Figure 15. Airflow through the HP BladeSystem c7000 Enclosure – side view

Redundant

As illustrated in Figure 16, fans located in each of four cooling zones provide direct cooling for server

blades in their respective zones and redundant cooling for adjacent zones. Each zone can contain

four server blades. Full-height server blades couple the two vertical zones into a single zone, as in the

example in Figure 16 where a full-height server blade in bay 1 has resulted in zones 1 and 3

operating as a single zone. Fans 3 and 8, shown in the Figure 16 rear view, support two adjacent

horizontal zones and will operate at the higher speed of either of the two zones. If any fan fails, the

result is only a 10 to 25% loss in cooling capacity.

Figure 16. Four cooling zones in the c7000 enclosure

Zone cooling minimizes the power consumption of the fan subsystem by increasing fan efficiency in a

single zone if one of the server blades requires more cooling. This saves operating costs and