HP Xw460c - ProLiant - Blade Workstation Ikhtisar - Halaman 33

Jelajahi secara online atau unduh pdf Ikhtisar untuk Beralih HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 halaman. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Juga untuk HP Xw460c - ProLiant - Blade Workstation: Panduan Pelaksanaan (35 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Panduan Instalasi (2 halaman), Panduan Pertanyaan yang Sering Diajukan (14 halaman), Poster Pengaturan (9 halaman), Panduan Instalasi (33 halaman), Panduan Manajemen (28 halaman), Manual Perangkat Keras (23 halaman), Panduan Pengguna (33 halaman), Panduan Pengoptimalan (13 halaman), Garansi Terbatas (10 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Petunjuk Instalasi (8 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman)

Figure A-2. Numbering of half-height server bays in the HP BladeSystem c7000 Enclosure

Enclosure blade zones

The c7000 enclosure is divided into four zones by vertical support metalwork. These are not the same

as the cooling zones referred to above. Within each zone a removable divider is used to support

half-height devices. To install a full-height server blade in any zone, this divider must be removed.

Storage blades and tape blades can be installed in the same zone as either full-height or half-height

server blades. Each SB40c or tape blade comes with a bracket that allows a half-height blade to be

mounted on top of the storage blade.

Figure A-3. Mixed configuration – full-height and half-height population rules

A half-height SB40c storage blade must be installed within the same zone as its partner server blade.

If the SB40c is partnered with a full-height server blade, the SB40c must be installed in the bottom