HP Xw460c - ProLiant - Blade Workstation Ikhtisar - Halaman 8

Jelajahi secara online atau unduh pdf Ikhtisar untuk Beralih HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 halaman. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Juga untuk HP Xw460c - ProLiant - Blade Workstation: Panduan Pelaksanaan (35 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Panduan Instalasi (2 halaman), Panduan Pertanyaan yang Sering Diajukan (14 halaman), Poster Pengaturan (9 halaman), Panduan Instalasi (33 halaman), Panduan Manajemen (28 halaman), Manual Perangkat Keras (23 halaman), Panduan Pengguna (33 halaman), Panduan Pengoptimalan (13 halaman), Garansi Terbatas (10 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Petunjuk Instalasi (8 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman)

are connected to the management network, providing redundant management network connections to

each enclosure.

A serial port on each BladeSystem Onboard Administrator module provides full out-of-band CLI

access to the BladeSystem Onboard Administrator and is used for BladeSystem Onboard

Administrator firmware flash recovery. USB ports on the BladeSystem Onboard Administrator are

used to connect DVD drives to support the DVD feature in the c7000 enclosure. All c-Class enclosures

support two enclosure link connectors that provide private communications between enclosures linked

with CAT5 cable. In addition, the enclosure link-up connector provides an enclosure service port for

temporarily connecting a laptop PC to any of the linked enclosure BladeSystem Onboard

Administrators for local diagnostics and debugging.

Updating firmware

The BladeSystem Onboard Administrator manages firmware updates for the enclosure's management

devices. Updating server blade firmware including server BIOS, NIC and mezzanine BIOS, and

ProLiant Onboard Administrator (iLO 2) is possible using HP System Update Manager or the blade

firmware update maintenance CD. These utilities can be connected to all the server blades in the

enclosure using the BladeSystem Onboard Administrator enclosure DVD feature. When the active

BladeSystem Onboard Administrator detects an external USB DVD drive plugged into the USB port, it

scans the DVD drive for a CD or DVD disk. This disk can then be connected to one or more server

blades at the same time using the BladeSystem Onboard Administrator GUI, CLI, or Insight Display.

Redundant enclosure management

Redundant enclosure management is an optional feature of the c7000. It requires installing a second

BladeSystem Onboard Administrator module in the c7000 enclosure to act as a completely redundant

controller in an active-standby mode. Using redundant modules in the c7000 enclosure provides

complete fault tolerance. The redundancy logic is based on a continuous heartbeat between the two

modules over a dedicated serial connection (Figure 4). If the period between heartbeats exceeds a

timeout, the standby module automatically takes control of the enclosure and becomes the active

BladeSystem Onboard Administrator.

Three user interfaces to the BladeSystem Onboard Administrator allow control and provide

information about the enclosure and installed components:

Web browser GUI

Scriptable CLI

Insight Display diagnostic LCD panel

Additionally, the BladeSystem Onboard Administrator with KVM adds the ability to directly connect a

KVM switch through the VGA port. Remote network access to the GUI and CLI is available through the

management Ethernet port. A serial port is available for local CLI access and flash recovery. The

c-Class enclosure link-up port is also available as the service port for temporary local Ethernet access

to the BladeSystem Onboard Administrators and devices in linked enclosures. Insight Display is

accessed directly through the buttons on the display or remotely through the GUI.

User authentication maintains security for all user interfaces. User accounts created in the BladeSystem

Onboard Administrator define three user privilege levels and the component bays to which each level

is granted access. The BladeSystem Onboard Administrator stores the passwords for local user

accounts and can be configured to use Lightweight Directory Access Protocol (LDAP) authentication for

user group accounts.