HP Xw460c - ProLiant - Blade Workstation Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 halaman. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Juga untuk HP Xw460c - ProLiant - Blade Workstation: Panduan Pelaksanaan (35 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Panduan Instalasi (2 halaman), Panduan Pertanyaan yang Sering Diajukan (14 halaman), Poster Pengaturan (9 halaman), Panduan Instalasi (33 halaman), Panduan Manajemen (28 halaman), Manual Perangkat Keras (23 halaman), Ikhtisar (35 halaman), Panduan Pengoptimalan (13 halaman), Garansi Terbatas (10 halaman), Panduan Petunjuk Instalasi (10 halaman), Panduan Petunjuk Instalasi (8 halaman), Petunjuk Instalasi (4 halaman), Petunjuk Instalasi (2 halaman)

HP BIOS Serial Console User Guide

BIOS Serial Console Overview

BIOS Serial Console can be enabled in RBSU. By default, BIOS Serial Console

is disabled.

EMS support is a Microsoft® feature for the Windows® Server 2003 OS, which

is enabled by default in the OS, but which also must be enabled in the system

ROM. By default, EMS support is disabled for ML and DL servers, and is

enabled for BL servers.

Refer to "Operating System Support (on page 17)" for more information about

using supported OSs.

BIOS Serial Console initialization occurs during power-up or system reset,

before the first message is displayed on the screen.

A null modem cable should be connected to one of the serial ports on the server

for console redirection. Be sure to connect the cable to the serial port that

corresponds to the correct COM port on which BIOS Serial Console is enabled.

The default COM port is COM 1 for systems with BIOS Serial Console enabled

by default. This setup can be configured in RBSU.

Refer to "RBSU and BIOS Serial Console Configuration (on page 9)" for COM

port settings.

The following console redirection features are discussed in further detail in "HP

BIOS Serial Console/EMS Support Settings and Configuration (on page 9)":