Diamond Multimedia VC500MAC Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Adaptor Diamond Multimedia VC500MAC. Diamond Multimedia VC500MAC 14 halaman.

Hardware Installation:

1. Connect the left and right audio cables (Red and White) from your video

source (VCR/Camcorder/Game Console) outputs to the left and right audio

inputs of the VC500MAC. If your source only has one audio output, connect

to the red or white input.

2. Connect the video cable (Yellow) from your video source output into the video

input of the VC500MAC.

Note: alternatively, you can use the S-Video input/output in place of the

composite RCA yellow video cable.

3. Connect the USB cable from the VC500MAC into an available USB port on

your Mac computer or Windows 10 based PC and proceed to Software

Installation

Software Installation (Mac OS)

1. After the hardware installation, install the Empia software from the provided

installation disk. Note: the serial activation key (Empia S/N) is located on the

installation disk paper envelope. If you do not have CD/DVD drive you can

download the software from the link below and still use the same Empia S/N

on the disk envelope:

http://www.dmmdownload.com/downloads/CURRENT/PVR/VC500mac_Rev

_B.zip

If you want the installation disk for both Mac OS and Windows 10 OS use the