Aquatel S207E Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Aquatel S207E. Aquatel S207E 8 halaman. Wireless level indicator
Halaman Cetak
The S207E is a wireless tank level indicator for use
on fluid tanks, in septic systems or on other tanks
and cisterns that contain non-flammable liquids.
The Tank Unit is mounted on the top surface of the tank or cistern and uses ultrasonic
signals to detect the liquid level inside. This is then wirelessly transmitted to the
Display Unit. When the button is pressed the lights show you the fluid level.
When you are about to run out the "Low Fluid Level" light flashes to alert you.
Main features and benefits:
•
Peace of Mind - know exactly how much fluid is in the tank at any time
•
Ultrasonic level measurement - no holes in side of tank or mechanical floats
•
Resilient – stands up to all climatic conditions: high winds, rain, snow and
extreme heat
•
Stylish – the Tank Unit is low profile and the Display Unit looks good in any
kitchen
•
Wireless system - no need for control wires or trenching
•
Intelligent – robust and reliable software which notifies you of anything that
needs your attention
•
Tough – designed and constructed in New Zealand using materials that
withstand the harshest environment.
Before you install
Try your unit!
1) Insert the batteries supplied in the Display Unit and Tank Unit.
2) Hold the Tank Unit so the ultrasonic signal bounces off a flat reflective surface
such as the floor or wall.
3) Watch the Display Unit update
4) Test the range by leaving the Tank Unit on the top of the tank and walking away
with the Display Unit. If the Display Unit beeps every few seconds the units are in
range. When the Display Unit stops beeping the units are out of range.
Take the batteries out while you read the rest of the manual and find your tools.
Note - Ensure you read the complete manual before installation.