Diamond Products F1500 Panduan Operator - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Lantai Diamond Products F1500. Diamond Products F1500 11 halaman. High-speed burnisher

Halaman Cetak
Handle Release Assembly Instructions
1) Remove nut and spacer from handle
bracket assembly.
2)
Push the two handle brackets backw-
ard so they lean against the rear wheel.
1) Make sure actual cord wrap faces to the left of the machine
when you are standing behind it.
2)
Assemble hardware in the following order spacer, left handle
bracket, nylock nut. (do not over tighten nylock
tighten it enough to hold handle in place when compression
lever is in down position)
STEP 4
1) Connect power cords together.
-5-
STEP 1
STEP 3
STEP 2
1) Remove handle clamp
blocks with 5mm
2)
Place handle assembly into
handle clamp blocks
3)
Re-attach the blocks to the
base with5mm hex head
.
Only
Diamond Products
hex head
Operator's Manual