Diamond Products CARBON SPOT 55H Panduan Operator - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Operator untuk Scrubber Diamond Products CARBON SPOT 55H. Diamond Products CARBON SPOT 55H 11 halaman.

Halaman Cetak

TROUBLESHOOTING

SYMPTOM
No spray
Pump not running
Low suction
No suction
Always use original equipment replacement parts.
Contact your distributor for additional information or to arrange for service.
-11-
ALWAYS UNPLUG THE MACHINE BEFORE
DISCONNECTING OR CONNECTING ANY
WIRES OR COMPONENTS.
solution tank is empty;
solution hose is not completely connected to machine & tool;
spray tip on tool is plugged;
pump is not running;
pump inlet f lter is dirty or plugged;
no power to pump;
• check outlet for power;
• power to cord or switch is bad;
recovery tank not sealed;
damaged vacuum gasket;
dirty vacuum inlet screen;
recovery hose loose or cracked;
recovery tank is full;
vacuum motor not running;
• check outlet for power;
• power cord is bad;
• bad switch;
• bad vac motor;
POSSIBLE CAUSE
Diamond Products
Operator's Manual