Diamond Systems Corona Petunjuk Manual - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Unit Kontrol Diamond Systems Corona. Diamond Systems Corona 18 halaman. Sumit-ism wireless and ethernet communications module
3.2
WiFi Module
The WiFi module is an industrial grade, high power 600mW (28dBm) IEEE802.11a/b/g 108Mbps Wifi mini-PCI
module with two U.FL RF connectors designed specifically for operation in high temperature and high
performance-critical applications.
With industrial grade components and a high power design, the module is ideal for embedding into new or
existing industrial grade systems for rugged outdoor point to point or building to building wireless Access
Point/Bridge connections, and rugged application-specific devices used in many vertical markets.
3.3 PLX PEX8112 PCIe to PCI Bridge Chip
The PEX 8112 supports forward and reverse bridging as defined by the PCI Express-to-PCI/PCI-X Bridge
Specification 1.0. In forward mode, the bridge allows legacy PCI chips and adapters to be used with new PCI
Express processor systems.
PCIE Interface
PCI Express Base 1.0a compliant
X1 Link, dual-simplex, 2.5Gbps per direction
Automatic LVDS polarity reversal
PCI Interface
PCI v.3.0: 32bit, up to 66Mhz
3.3VI/O and 5V tolerant PCI
Provides PCI clock output
3.4
Dual 10/100 USB LAN Controllers
Single Chip Hi-Speed USB 2.0 to 10/100 Ethernet Controller
Integrated 10/100 Ethernet MAC with Full Duplex and HP Auto-MDX support
Integrated USB 2.0 High Speed PHY and Device Controller
+/- 8kV HBM ESD protection (component level)
+/- 8kV contact-discharge, +/-15kV air discharge ESB protection per IEC61000-4-2
3.5
Chrontel CH7317B SDVO to VGA Controller
Supporting analog RGB outputs for a display monitor
Supporting maximum pixel rate of 165MP/s or graphics resolutions up to 1920x1200
High-speed SDVO (1G~2Gbps) AC-coupled serial differential RGB inputs
Supporting monitor connection detection
CORONA User Manual Rev A.11
www.diamondsystems.com
Page 7