Panasonic DLP PT-DZ6710 Lembar Spesifikasi - Halaman 3
Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Proyektor Panasonic DLP PT-DZ6710. Panasonic DLP PT-DZ6710 15 halaman. Dlp-based projector
Juga untuk Panasonic DLP PT-DZ6710: Lembar Spesifikasi (10 halaman), Lembar Spesifikasi (2 halaman)
Halaman Cetak
S
F
P
E
C
I
L
DLP
™
Projectors
RGB 1 IN:
RGB 2 IN:
VIDEO IN:
S-VIDEO IN:
SERIAL IN:
SERIAL OUT:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
LAN:
Power cord length:
Cabinet materials:
Dimensions (W x H x D): PT-DZ6710:
PT-DZ6710L:
Weight:
PT-DZ6710:
PT-DZ6710L:
Operating temperature:
Operating humidity:
Remote Control Unit
Power supply:
Operation range*
7
:
Dimensions (W x H x D):
Weight:
Supplied Accessories
Optional Accessories
Zoom lens (1.3 – 1.9:1)
Zoom lens (2.3– 3.6:1)
Zoom lens (3.6 – 5.4:1)
Zoom lens (5.4 – 8.6:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket:
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 In Standby mode eco, LAN-based network functions such as the standby ON function will not operate.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The HD/SYNC and VD inputs do not accept the tri-level sync signal.
*4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5 With legs at shortest position.
*6 Including the supplied lens.
*7 Operation range differs depending on environments.
As of February 2009
E
BNC x 5
R, G, B:
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
Y, P
, P
:
Y: 1.0 Vp-p (including sync signal), P
B
R
NOTE: HD/SYNC, and VD terminals do not accept tri-leve sync signals.
D-sub HD 15-pin x 1
R: 0.7 Vp-p, 75 ohms,
R, G, B:
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
NOTE: HD/SYNC, and VD terminals do not accept tri-leve sync signals.
Y: 1.0 Vp-p (including sync signal), P
Y, P
, P
:
B
R
BNC x 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin x 1 (RS-232C compliant) for external controller
D-sub 9-pin x 1 for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant
with PJLink™
3.0 m (9´10˝)
Molded plastic
498 mm x 175 mm*
(with supplied lens)
498 mm x 175 mm*
(without lens)
Approx. 16.0 kg (35.3 lbs)(with supplied lens)
Approx. 15.2 kg (33.5 lbs)(without lens)
0°–45°C (32°–113°F)
20%– 80% (no condensation)
3 V DC (AA battery x 2)
Approx. 30 m (98´5˝) when operated from directly signal receptor
51 x 176 x 23 mm (2˝ x 6-15/16˝ x 29/32˝)
134 g (4.7 oz) (including batteries)
Power cord
Wireless/wired remote control unit
Batteries for remote control (x 2)
Wire rope
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
PT-DZ6710/DZ6710L
5
x 440 mm*
6
(19-19/32˝ x 6-7/8˝ *
5
x 432 mm (19-19/32˝ x 6-7/8˝ *
/P
: 0.7 Vp-p, 75 ohms
B
R
/P
: 0.7 Vp-p, 75 ohms
B
R
5
x 17-5/16˝ *
5
x 17˝)
6
)
< 3 >