Panasonic ET-UW100 Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Panasonic ET-UW100. Panasonic ET-UW100 29 halaman. Easy wireless stick
Juga untuk Panasonic ET-UW100: Brosur & Spesifikasi (2 halaman), Prosedur Pembaruan Firmware (6 halaman), Spesifikasi (2 halaman), Panduan Pengoperasian (26 halaman)

Connecting Computer and Projector

Verify the network ID and other information for the projector, and then perform connection of the projector .

1 . Powering up the projector

Turn on the power of the projector .

2 . Setting the input

Press the <Panasonic APP> button / <NETWORK> button on the remote control (or press the <INPUT SE-

LECT> button on the projector), and switch the input to [Panasonic APPLICATION] or [NETWORK].

A standby screen is displayed in the image projected by the projector.

3 . Checking the projector

Check the projector's wireless LAN connection setting, projector name, and network ID.

The locations where this information is displayed may vary depending on the projector .

z For projectors that display the standby screen (Projector image)

The standby screen may not appear even for projectors that display that screen if

another user is already projecting an image or if the multi live mode (Page 15) is be-

ing used in the 4-screen or 16-screen index style . In such cases, you can check the

network ID by pressing the AUTOSETUP button.

・Example of standby screen display.

Projector name

connecton setting

z For projectors that do not display the standby screen (Projector image)

・ Example of input guidance display .

Network ID

Wireless LAN

Projector name

INPUT

SIGNAL NAME

MEMORY NO

WIRELESS LAN

PROJECTOR NAME

NETWORK ID

Wireless LAN

connecton setting

Network ID

NETWORK

Wireless LAN

XGA-A1

connecton setting

S-DIRECT

Projector name

NAME1234

Proj1234

Network ID

– 7 –