Panasonic PT-A900E Panduan Petunjuk Pengoperasian - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Proyektor Panasonic PT-A900E. Panasonic PT-A900E 36 halaman.
Halaman Cetak
Adjusting the picture
# Press the MENU button to display the menu screen.
$ Select the "PICTURE" menu from the main menu, and then press the
ENTER button.
% Press the F or G button to select an item.
& Press the I or H button to adjust the value or change the setting. For
items with selective setting or a bar scale, the individual adjustment
screen will be displayed. Press the F or G button to switch the item.
For items without any selective setting or bar scale, press the ENTER
button. The next screen for the item will then be displayed.
When an S-VIDEO/VIDEO/SCART
signal is being input
When a YP
P
/PC/HDMI signal is
B
R
being input
44-E
NGLISH
PICTURE MODE
The picture mode can be selected.
Refer to page 33 for details.
CONTRAST
This adjusts the contrast of the
picture. (Adjust the "BRIGHT"
setting first if required before
adjusting the "CONTRAST" setting.)
The picture is bright: I button
The picture is dark:
H button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOUR
(S-VIDEO/VIDEO/YP
P
/PC/HDMI
B
R
only)
The colour is too deep: I button
The colour is too pale: H button
NOTE:
B When PC signals are being
input, adjustment can be made
only when 1 125 (1 080)/60i
and 1 125 (1 080)/50i signals
are being input.
TINT
(NTSC/NTSC 4.43/YP
P
/PC/HDMI
B
R
only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish: I button
The flesh tones are reddish: H button
NOTE:
B When PC signals are being
input, adjustment can be made
only when 1 125 (1 080)/60i
and 1 125 (1 080)/50i signals
are being input.
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
COLOUR TEMP.
White areas are bluish: I button
White areas are reddish: H button
DYNAMIC IRIS
ON
The amount of light is controlled to
project the images with high
contrast.
OFF
"DYNAMIC IRIS" is disabled.
Noise Reduction (NR)
If the signal is of such poor quality
that picture interference appears,
set "NR" to "ON". To turn off the
"NR" feature, set to "OFF".
CINEMA REALITY
[S-VIDEO/VIDEO/SCART/525i
(480i) and 625i(576i) signals for
YP
P
signals/1 125(1 080)/60i and
B
R
1 125(1 080)/50i signals for YP
P
,
B
R
HDMI and PC signals only]
ON
Set to "ON" when you would like 24
frames per second pictures (such as
movies) to project the source
faithfully.
OFF
Set to "OFF" when the projected
pictures have problems with
captions or subtitles when the
setting is "ON".
E
-45
NGLISH