Panasonic PT-AE4000E Petunjuk Fungsional - Halaman 25
Jelajahi secara online atau unduh pdf Petunjuk Fungsional untuk Proyektor Panasonic PT-AE4000E. Panasonic PT-AE4000E 50 halaman. Full high-definition home cinema projector
Juga untuk Panasonic PT-AE4000E: Panduan Petunjuk Pengoperasian (36 halaman), Brosur & Spesifikasi (6 halaman), Petunjuk Fungsional (50 halaman)
Halaman Cetak
3)
Adjusting the
OUTPUT level.
To adjust the OUTPUT level from the present
setting, press ▲ ▼ continuously until it reaches to
your desired level.
It can move up and down but cannot be set beyond
the adjacent points.
Ex. Press ▲ in the Y ADJUST menu and move
the selected point upward.
Y ADJUST
0%
INPUT
POINT
5
INPUT
Y ADJUST
0%
MOVE
UP
INPUT
POINT
INPUT
5
50%
100%
OUTPUT
50%
+10
RESET
50%
100%
OUTPUT
50%
+30
RESET
4)
Changing the adjustment by different colour types.
To switch to a different colour ADJUST menu, press
the ENTER button continuously until it reaches your
desired colour ADJUST menu.
Y ADJUST
B ADJUST
You can also switch each different colour ADJUST
menu through the GAMMA ADJUSTMENT menu.
Select your required colour ADJUST (Y ADJUST,
R ADJUST, G ADJUST, B ADJUST) with ▲ ▼ in
the GAMMA ADJUSTMENT menu and press the
ENTER button.
GAMMA ADJUSTMENT
ENTER
SELECT
RETURN
R ADJUST
0%
POINT
5
5)
Setting the
OUTPUT levels back to the default
setting.
To set the OUTPUT level on the selected point
back to the default setting "0", press the DEFAULT
button on the remote control.
NOTE:
•
Individual
INPUT levels cannot be set back to their
default settings by pressing the DEFAULT button.
Please press ◄ ► to move back themselves if needed.
•
In the
Y ADJUST menu, if you press the DEFAULT
button, all Y/R/G/B output settings will go back to the
default setting "0".
•
Adjustable range depends on the input signal.
PICTURE menu
R ADJUST
G ADJUST
ADJUSTMENT MODE
ADVANCED
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
5
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
50%
100%
INPUT
INPUT
OUTPUT
50%
+10
RESET
E
NGLISH - 25