Panasonic PT-D10000 Series Spesifikasi - Halaman 6

Jelajahi secara online atau unduh pdf Spesifikasi untuk Proyektor Panasonic PT-D10000 Series. Panasonic PT-D10000 Series 12 halaman. 3-chip dlp projector
Juga untuk Panasonic PT-D10000 Series: Lembar Spesifikasi (10 halaman), Lembar Spesifikasi (10 halaman), Dimensi (1 halaman), Dimensi (1 halaman), Manual Penyesuaian (17 halaman), Garansi Terbatas (1 halaman), Spesifikasi (6 halaman), Panduan Penyiapan dan Pengoperasian (37 halaman), Spesifikasi (12 halaman)

Halaman Cetak
Panasonic PT-D10000 Series Spesifikasi

Cable specifications

<Connecting to a PC>
To connect the computer to the SERIAL terminal, prepare an adequate communication cable that
Attention
fits to your personal computer.
Transmission from the computer
(Used Only for PT-D7700/DW7000, PT-D5600/DW5000 and PT-D3500)
Transmission from the computer begins with STX, then the ID, command, and ETX are sent in this order.
STX
Start
0x02
Self-diagnosis result read commands is binary 4 byte command.
ID:
ID ALL=0x00, ID1=0x01, ID2=0x02, ID3=0x03, ID4=0x04, ... ,ID63=0x3f, ID64=0x40
Projector default setting is ID ALL.
Responses from the projector
STX
Start
0x02
Responses are binary 12 byte command.
Self-diagnosis results are 4 byte (32bit) command.
P5-P8, all 4 bytes are extended bits and the values are undefined.
Projector
1
2
3
4
5
6
7
8
9
ID
C1
ID
Command
0x00 ~ 0x40
0xfe
ID
C1
ID
Command
0x00 ~ 0x40
0xfe
Computer
(DTE specifications)
NC
NC
NC
NC
NC
NC
NC
NC
ETX
End
0x03
P1
P2
P3
bit31
Self-diagnosis information 4 bytes
(32bits)
6
1
2
3
4
5
6
7
8
9
P4
P5
P6
P7
bit0
P8
ETX
End
0x03