Panasonic PT-F200NTU - LCD Proj XGA 400:1 3500 Lumens VGA Svid Wrls Cpnt Panduan Pengguna - Halaman 28
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Proyektor Panasonic PT-F200NTU - LCD Proj XGA 400:1 3500 Lumens VGA Svid Wrls Cpnt. Panasonic PT-F200NTU - LCD Proj XGA 400:1 3500 Lumens VGA Svid Wrls Cpnt 49 halaman. Panasonic pt-f200: product brochure
Juga untuk Panasonic PT-F200NTU - LCD Proj XGA 400:1 3500 Lumens VGA Svid Wrls Cpnt: Panduan Cepat (1 halaman), Panduan Pengoperasian Tingkat Lanjut (33 halaman), Brosur & Spesifikasi (6 halaman)
Halaman Cetak
Network setting of the projector
Wired LAN settings
You can make detailed wired LAN settings.
Select [WIRED LAN] at the network menu and click the [ENTER] button.
WIRED DETAILED SETUP
DHCP
IP ADDRESS
SUBNETMASK
GATEWAY
RETURN
SELECT
DHCP
※
:
ON : If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF : If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS
※
], [SUBNETMASK
※ "Glossary" (See page 44)
A wired LAN and wireless LAN cannot be used in the same segment.
Default wired LAN settings
The following wired LAN settings are set before the projector leaves the factory.
DHCP
: OFF
IP ADDRESS
: 192.168.10.100
SUBNETMASK
: 255.255.255.0
GATEWAY
: 192.168.10.1
(cont.)
OFF
192.168. 10.100
255.255.255.
0
192.168. 10. 1
OK
CANCEL
※
] and [GATEWAY
※
].
28