Panasonic PT-L780U Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Proyektor Panasonic PT-L780U. Panasonic PT-L780U 42 halaman. Panasonic operating instructions lcd projector pt-l780ntu pt-l780u
Juga untuk Panasonic PT-L780U: Panduan Petunjuk Pengoperasian (42 halaman)
Halaman Cetak
Example of connecting to video equipments
D-sub 15 (male) - BNC5 (female)
Computer for
adapter cable (sold separately)
control use
D-sub 9-pin
(male)
USB
SERIAL
RGB1 IN
RGB2 IN/RGB OUT
R/R-Y/P
G/Y
B/B-Y/P
SYNC/HD
REMOTE
R
B
RGB3 IN
DVD player
Red (connect to P
Blue (connect to P
Green (connect to Y signal connector)
NOTE:
B Only one audio system circuit is available for the AUDIO IN L-R jacks for
S-VIDEO/VIDEO signals, so if you wish to change the audio input source,
you will need to remove and insert the appropriate plugs.
B Only one audio system circuit is available for the RGB AUDIO IN jacks, so
if you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
B If an audio system is connected to the AUDIO OUT jack, the sound
volume balance can be controlled by the remote control unit which is
supplied with the projector.
B If the video signal source is connected using a cable with a BNC
connector plug, use a BNC/RCA adapter (sold separately) to convert the
cable end to an RCA plug-type jack.
B Refer to page 61 for a list of compatible YP
to the projector.
B If the signal cables are disconnected or if the power supply for the
computer or video deck is turned off while the digital zoom function is
being used, this function will be cancelled.
24
All manuals and user guides at all-guides.com
Red (connect to P
signal connector)
R
Blue (connect to P
signal connector)
B
Green (connect to Y signal connector)
Digital broadcast
tuner or DVD player
S-VIDEO IN
L
DVI-D IN
AUDIO OUT
R
RGB AUDIO IN
VIDEO IN
AUDIO IN
VD
Audio system
signal connector)
R
signal connector)
B
P
signals which can be input
B
R
DVD player
Video deck
Example of connect
Computer for
control use
D-sub 9-pin
(male)
USB
SERIAL
REMOTE
Computer
NOTE:
B It is better to shut down the
switch of the projector.
B Refer to the list of compatib
signals which can be input t
B Do not input the signal to th
RGB2 SELECT item in the
page 44.)
Refer to the accessory CD-
projector to a personal com
network using an optional
(PT-L780NTU only)
R
R/R-Y