Panasonic PTLC76U - LCD PROJECTOR Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Proyektor Panasonic PTLC76U - LCD PROJECTOR. Panasonic PTLC76U - LCD PROJECTOR 32 halaman. Commercial use
Juga untuk Panasonic PTLC76U - LCD PROJECTOR: Brosur & Spesifikasi (4 halaman), Panduan Petunjuk Pengoperasian (37 halaman)
Halaman Cetak
Turning off the power
RGB input indicator
Power indicator
%
#
Press the POWER button.
B"POWER OFF" is displayed on the
screen.
Select "OK" using the I I and H H buttons and
$
then press the ENTER button.
BThe lamp unit will switch off and the picture will stop being projected.
(The power indicator on the projector will illuminate orange.)
Press the MAIN POWER switch to turn off the
%
power after the power indicator on the
projector illuminates red.
BDo not cut power to the projector in any way while the cooling fan is
still operating. Be careful not to switch off the MAIN POWER switch
of the projector or unplug the power cord from the electrical outlet.
24-E
NGLISH
#
POWER
INPUT
VIDEO
RGB
AUTO
MENU
SETUP
ENTER
FREEZE
SHUTTER
$
STD
VOLUME
D.ZOOM
INDEX
WINDOW
PROJECTOR
P O W E R O F F
O K
C A N C E L
NOTE:
B You can also turn off the power by pressing the POWER button twice or
by holding down it for at least 0.5 seconds.
B When the projector is in standby mode (the power indicator on the
projector is illuminated red), the projector will still draw a maximum 4 W of
power, even when the cooling fan has stopped.
Power indicator
Power indicator status
The projector is in standby mode and image projection
Red
Illuminated
is possible by pressing the POWER button.
Illuminated
A picture is being projected
Green
The projector is preparing for projection (After a
Flashing
short period, a picture will be projected)
The lamp is cooling down (The cooling fan is
Illuminated
operating)
Orange
The projector is preparing for projection (After a
Flashing
short period, a picture will be projected)
RGB INPUT indicator
RGB INPUT indicator status
Illuminated during
A signal is being input to either the RGB1 IN or
standby mode
RGB2 IN connector.
Illuminated during
A signal is being input to the connector selected
projection
using the input select buttons.
Projector status
Projector status
E
-25
NGLISH