Panasonic HT40 - SC Home Theater System Panduan Petunjuk Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic HT40 - SC Home Theater System. Panasonic HT40 - SC Home Theater System 24 halaman. Home theater audio system

Panasonic HT40 - SC Home Theater System Panduan Petunjuk Pengoperasian
[INPUT SELECTOR, <, >]
For selecting input.
INPUT SELECTOR
[ ]
Headphone jack
Plug type: 3.5 mm (
Sound does not come from the speakers if
you connect headphones.
Avoid listening for prolonged periods of time
to prevent hearing damage.
[PCM, C. FOCUS]
PCM: Lights when the PCM FIX
mode is set
C.FOCUS: Appears when you
are using Center Focus
C.FOCUS
PCM
DIGITAL INPUT
W
M
DIGITAL DTS
ft
kHz
PL 2CH MIX
MHz
[% DIGITAL, DTS, % PL ΙΙ]
Lights to indicate the source's input
signal and decoding format used.
% DIGITAL: Dolby Digital sources
DTS: DTS sources
% PL ΙΙ: Dolby Pro LogicΙΙ
decoder is being used
[VOLUME]
Volume control.
POWER
VOLUME
/
") stereo
1
8
[DIGITAL INPUT]
Lights when input is
digital.
SFC
[SFC, 2CH MIX]
SFC: Appears when
you are using an SFC
mode
2CH MIX: Appears
when you are
listening to a multi-
channel source with
headphones

Making a recording

MENU
TUNE
SURROUND
SETUP
ENTER
MUSIC
RETURN
MUSIC PORT
You can record to a unit connected to DVR/DVD-P OUT.
You can record any analog source except DVR/DVD-P IN.
1. Press [INPUT SELECTOR < or >] to select the
source to be recorded.
2. Begin recording.
Follow your recording unit's operating instructions.
3. Start the source to be recorded.
Note
This unit cannot record digital sources. Connect through the
analog terminals and select "ANALOG" input (➡ page 18).

The RESET function

MENU
TUNE
SETUP
ENTER
RETURN
POWER
MENU
SURROUND
TUNE
SETUP
ENTER
MUSIC
RETURN
MUSIC PORT
The operation settings for the unit will be initialized to the
settings made at the time of shipment.
However, any preset radio stations will not be erased.
1. Press and hold [―SETUP] to enter the setup
menu.
2. Press [TUNE - or +] to select "RESET" ➡ [ENTER].
3. Press [TUNE +] to select "RESET YES"
➡ [ENTER].
To cancel, select "RESET NO".
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered trademarks
of Digital Theater Systems, Inc.
INPUT SELECTOR
INPUT SELECTOR
VOLUME
INPUT SELECTOR
VOLUME
13