Panasonic PM31 - SC Micro System Panduan Petunjuk Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic PM31 - SC Micro System. Panasonic PM31 - SC Micro System 16 halaman. Cd stereo system
Halaman Cetak
CDs and MP3 – Play (Continued)
C C hecking which CDs are in the trays
hecking which CDs are in the trays
(CD CHECK)
(CD CHECK)
1
Press [CD CHECK].
Press the button again to close the trays.
2
• The tray with a CD being played will not open.
• If the player is stopped, all trays will open.
• Do not remove or insert CDs during CD check.
• Do not pull out the trays during CD check.
• 8 cm CDs cannot be checked.
CD display
CD display
This function allows you to display the information
of the current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD-DA
Elapsed play time
MP3
Elapsed time
ID3 (Artist)
ID3 (Track)
• Maximum number of displayable characters: approximate 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
Advanced CDs and MP3 functions
Advanced CDs and MP3 functions
Direct access play
Direct access play
This function allows you to start play from a specifi c track.
CD-DA
Press the numeric buttons to select and play your
desired track.
MP3
Press [ALBUM
1
Press [3/FF/¢] once and then the numeric buttons
2
to select and play your desired track.
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
• This function does not work during any random/program mode.
Repeat play
Repeat play
You can repeat program play or other selected
play mode.
Press [REPEAT] before or during play.
"REPEAT ON" and "
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
8
RQT7928
CD-DA
CD CHECK
Remaining play time
Remaining play time
Album name
ID3 (Album)
Track name
or
] to select the album.
CD-DA
" are displayed.
" is cleared.
Marking a track
Marking a track
MP3
Enable you to mark one track for each loaded disc
so that you can directly play the track later.
During play, press and hold the [MARKER] until
"STORING" blinks on the display to mark your favourite
track.
Press [MARKER] during play or stop mode to recall and
play a marked track.
• The marker memory is cleared when you open the CD tray.
• This function does not work during any random/program mode.
Program play
Program play
This function allows you to program up to 24 tracks.
CD-DA
Press [CD 6] and then [CLEAR 7].
1
2
Press [PROGRAM].
3
Press [DISC].
(Within 10 seconds or so)
4
Press [1] ~ [5] to select your desired disc.
Press the numeric buttons to select your desired
5
track.
Example:
Repeat steps 3 to 5 to program other tracks.
6
Press [CD 6] to start play.
7
MP3
Press [CD 6] and then [CLEAR 7].
1
2
Press [DISC].
(Within 10 seconds or so)
3
Press [1] ~ [5] to select your desired disc.
Press [CLEAR 7].
4
5
Press [PROGRAM].
6
Press [ALBUM
album.
7
Press [3/FF/¢] once and then the numeric buttons
to select your desired track.
Example:
MP3
Press [ENTER].
8
Repeat steps 6 to 8 to program other tracks.
Press [CD 6] to start play.
9
CD-DA
Program number
Program
Track number
indicator
or
] to select your desired
Album number
Track number
MP3