Panasonic RX-DT610 Panduan Petunjuk Pengoperasian - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic RX-DT610. Panasonic RX-DT610 46 halaman. Portable stereo component system

Halaman Cetak

RECORDING

@ Recording from CD without edit pause func-

@ Pause button

tion

The pause button can be used to temporarily stop the tape

1. Press the operation switch to turn on the unit, press the

from moving during recording or playback.

CD eject button to insert the CD, and then press the eject

Before beginning a recording, first press and lock the pause

button of the deck 1 to insert the recording tape.

button. Then, press the record button. (The tape will not

2. Press the record button after both the total number of

move.) When ready to record, press the pause button to

tracks and total playing time appear on the display panel.

release it. This will start tape movement

for immediate

The recording and disc play will begin.

recording.

Do not use the search mode during recording. Monitor

sound will be also recorded.

Note:

Do not use the pause button to stop the tape for a

@ Recording radio broadcasts

long period of time.

mac

1. Follow the procedure described in "RADIO".

2. Insert the recording tape into the cassette compartment

™ Monitoring

3. Press the record button.

The monitor system enables you to listen, through the

Recording will begin.

speakers or headphones, to the sound as it is being re-

To stop the recording, press the sfop/eject button.

corded.

The "tailored" frequency response, as set by the XBS

If it is necessary to adjust the volume level of the sound

and graphic equalizer, is not recorded onto the tape. This

being monitored, do so by using the volume control.

allows you to listen to the tape on different systems and

in different environments, and still be able to tailor the

playback frequency response of the tape.

Note:

If an mixing microphone is placed too close to the

speakers, feedback (howling) may be heard. If so,

place the microphone as far away from the speakers

as possible, or reduce the volume.

How to use the FM mode/beat proof button

When an MW/LW broadcast is recorded, the FM mode/beat

proof button can be used to reduce unwanted "beat" signals

(whistle) which are sometimes present. Press the button to

whichever position (MW: BP 1, BP 2 or BP 3/LW: BP 1, BP 2

m Erasure of recording

or BP 3) best reduces these "beat" signals.

When recording, previously recorded signals on the tape will

be erased automatically.

™ Automatic recording level

To erase a tape without re-recording, use the following pro-

This unit has an automatic level control (the recording level

cedure.

;

is automatically adjusted).

1. Press the operation switch to turn on the unit.

2. Press the "TAPE" button of the function select buttons.

3. Insert the tape to be erased.into the deck 1 by pressing

the stop/eject button.

4. Press the record button.