Panasonic SA-AK340 Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic SA-AK340. Panasonic SA-AK340 20 halaman. Cd stereo system model no. sc-ak340; sc-ak240
Halaman Cetak
Radio
Manual tuning
Manual tuning
Press [TUNER, BAND] to select "FM" or "AM".
1
2
Press [PLAY MODE] to select "MANUAL".
3
Press [4, REW / ] or [¢,
frequency of the required station.
• "
" is displayed when a stereo FM broadcast is being
received.
• "TUNED" is displayed when a radio station is tuned.
To tune automatically
Press and hold [4, REW / ] or [¢,
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4, REW / ] or [¢,
once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappear.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
AM allocation setting
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
Press and hold [TUNER, BAND].
1
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
Continue to hold down [TUNER, BAND].
2
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After changing the setting, previously preset frequency
will be cleared.
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER, BAND] to select "FM" or "AM".
/ FF] to select the
Automatic presetting
Automatic presetting
1
2
/ FF] until the
The tuner presets all the stations it can receive into the
/ FF]
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting
Manual presetting
1
2
3
4
Selecting a preset station
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1
2
Memory preset
Memory preset
Tune to the frequency where pre-setting is to begin.
Press and hold [PROGRAM] to start presetting.
Press [PLAY MODE] to select "MANUAL".
Press [4, REW / ] or [¢,
required station.
Press [PROGRAM].
Press the numeric buttons to select a channel.
For channels 10 to 15 press [h10], then the two digits.
The station occupying a channel is erased if another
station is preset in that channel.
Press [PLAY MODE] to select "PRESET".
Press [4, REW / ] or [¢,
channel.
/ FF] to tune to the
/ FF] to select the
13
RQT8043