DIAQUIP QHS-400 Panduan Operator - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Operator untuk Melihat DIAQUIP QHS-400. DIAQUIP QHS-400 18 halaman. Electric handsaw

GROUNDING INSTRUCTIONS

1. All grounded, cord-connected tools:

In the event of a malfunction or breakdown, grounding provides a path of least resistance

for electric current to reduce the risk of electric shock. This tool is equipped with an

electric cord having an equipment-grounding conductor and a grounding plug. The plug

must be plugged into a matching outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed

by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. The conductor with insulation having an outer surface that is green with or without

yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric

cord or plug is necessary, do not connect the equipment-grounding conductor to a live

terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not

completely understood, or if in doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding plugs and 3 pole receptacles

that accept the tool's plug.

Repair or replace damaged or worn cord immediately.

/12

GROUNDING INSTRUCTIONS

2. Grounded, cord-connected tools intended for use on a supply circuit

Pin Socket

Diaquip Standard 110V Plug and extension socket with integrated grounding pin

WWW.DIAQUIP.CO.UK

having a nominal rating less than 150 V:

This tool is intended for use on a circuit that has an outlet that looks like those

illustrated below.

Should an alternative connection type need to be used, please consult local advice and

guidance to the country of use, to ensure appropriate and effective electrical compliance is

maintained for maximum safety and protection to the user, and the immediate work area

and its occupants.

Grounding Pin

Note: In Canada, the use of a temporary adapter is not permitted by the

Canadian Electrical Code.

/13