Diasonic DDR-4500 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perekam Suara Diasonic DDR-4500. Diasonic DDR-4500 18 halaman.

used when the backlight is "ON".

c. "Contrast Control" — Use the slider bar to adjust the contrast of the display. When set too

low, the display will not be as visible. The default setting of "05" is usually best.

d. "ID3 Tag" — This setting is used to display added information that may be attached to

computer audio files. When set to "ON" and an audio file with ID3 tags is selected, the title

of the file may also contain the Artist, Album, track time, and more. When set to "OFF" only

the title of the audio file will be displayed. Most ID3 tags can be viewed and edited with a

Windows computer by selecting the file's "Properties", then selecting the "Summary" tab.

Note: When a long filename has been highlighted, it will scroll after two seconds.

5. "System Settings"

a. "Time and Date" — Use the RIGHT ►►(5) and

LEFT ◄◄ (8) buttons to move between hours,

minutes, months, days , and years. Use the UP

▲(2) and DOWN ▼(7) buttons to modify the

highlighted item. Use the PLAY Button ►∥(6) to

save changes. Use the MENUP or BACKW

to exit without saving.

b. "Sleep Timer" — The Sleep Timer can be set to play for 15, 30, 45, 60, 75, 90, 100 or 120

minutes. When that time expires, the it will power off automatically. A icon will appear at the

top of the display to let you know that the "Sleep Timer" has been enabled. The Sleep Timer

will be disabled if it is powered off and then on again. The Sleep Timer can also be useful when

recording radio shows up to two hours in length, because it will stop recording at the set time

and then power off.

c. "Auto Off Time" — This setting is used to conserve power. There are 4 settings for "Auto

Off Time": Off, 1, 3, and 5 Minutes. If itis not playing or recording and no buttons are pressed

for the preset amount of time, it will power off.

d. "Factory Defaults" — This is used to reset it back to the default factory settings. This

setting will not affect the Time, Date, Files, or Timer schedules.

e. "Format Memory" — Choose to format the internal or (optional) SD card memory. When memory is

formatted, all files on the selected memory are permanently erased. It is best to format a new or

previously used SD card before recording files to it. Use caution when formatting memory, as it

permanently erases your files!

f. "10 or 9 KHZ" —If using the CC Witness to listen to AM radio in Europe, use this setting to

switch AM Radio to 9kHz AM tuning steps.

Note: All timer schedules and radio station memory presets will be erased when switching between

10kHz for North America and 9kHz tuning steps for Europe. You may want to write down your presets

before using this function.

g. "Memory Info" — This screen will display the total and free amount of memory remaining for

the Internal and (optional) SD card memories. Also, the firmware version will be displayed at the