Panasonic SCEN53 - DESKTOP CD AUDIO SYS Panduan Petunjuk Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic SCEN53 - DESKTOP CD AUDIO SYS. Panasonic SCEN53 - DESKTOP CD AUDIO SYS 16 halaman. Cd mini system
Juga untuk Panasonic SCEN53 - DESKTOP CD AUDIO SYS: Panduan Petunjuk Pengoperasian (21 halaman)
Halaman Cetak
CDs
CD selection
Choose CDs with this mark:
Do not:
•
use irregularly shaped CDs.
•
attach extra labels and stickers.
•
use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
•
attach scratch proof covers or
any other kind of accessory.
•
write anything on the CD.
•
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
•
use CDs printed with label
printers available on the market.
This unit can play CD-DA (digital audio) format audio CD-R and
CD-RW that have been finalized (a process that enables CD-R/
CD-RW players to play audio CD-R and CD-RW) upon completion
of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
1
Press [L/c] to open the CD lid.
The unit comes on.
Ensure that the whip antenna does not block the CD lid when it is
opening.
2
Load a CD with the label facing outward.
Press [L/c] to close the CD lid.
Caution:
Keep fingers away from the CD lid when it is closing to
avoid possible minor injury.
3
Press [CD :/J] to start play.
Plays to the end of the CD and stops.
4
Adjust the volume.
To stop the disc
Press [L/c]. (remote control: [L]).
To pause play
Press [CD :/J]. Press [CD :/J] again to resume play.
Skipping tracks
Press [g/∂] (backward) or [µ/f] (forward).
Searching through tracks
During play or pause
Press and hold [g/∂] (backward) or [µ/f] (forward).
8
RQT6734
XXXX XXXX XXXXX
XXXX XX
XXXX XXXX XXXXX
x
XXXX XXXX XXXXX
XXXX XXXX
CL CLOCK
CK
TIMER
TIMER
TIMER ADJ
TIMER ADJ
ON/OFF
ON/OFF
DISPLAY AY
DISP
SLEEP
SLEEP PGM/
PGM/–CLEAR
EQ
EQ
LIVE VIRTUALIZER PLAY MODE
LIVE VIRTUALIZER
PLAY MODE
3
AUX
AUX
TUNER/BAND
TUNER/BAND
CD
CD
TUNING MODE
TUNING MODE
1 • 2
VOLUME
VOLUME
L
g/∂, µ/f
4
One touch play
When a CD is loaded and the unit is off, press [CD :/J].
The unit comes on and starts play.
Note
•
During random play (A page 9), you cannot skip to tracks which
have already been played.
•
During program play or random play (A page 9), you cannot search
forward or backward over tracks.
•
During program play, skipping is always in the programmed order,
whether forward or backward.
•
Program play cannot be used in combination with random play.
Direct access play
Direct access allows you to start normal play from a specific track to
the last track of the CD.
Preparation:
Press [CD :/J] and then [L/c].
1
Press [g/ ∂] or [µ/f] to select the desired track
CLEAR
number.
2
Press [CD :/J] to start play.
Play will start with the track you select.
2
1