Panasonic SCPM31 - MINI HES W/CD PLAYER Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic SCPM31 - MINI HES W/CD PLAYER. Panasonic SCPM31 - MINI HES W/CD PLAYER 16 halaman. Cd stereo system
Juga untuk Panasonic SCPM31 - MINI HES W/CD PLAYER: Panduan Petunjuk Pengoperasian (16 halaman)
Halaman Cetak
Radio – Tune
Manual tuning
Manual tuning
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
Press[4/REW/ 4] or [3/FF/¢] to select the
3
frequency of the required station.
• "
" is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [4/REW/4] or [3/FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4/REW/4] or [3/FF/¢]
once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappear.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
Numeric
buttons
Memory preset
Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
Press [4/REW/ 4] or [3/FF/¢] to tune to the
2
required station.
3
Press [PROGRAM].
4
Press numeric buttons to select a channel.
• The station occupying a channel is erased if another
Selecting a preset station
Selecting a preset station
Press numeric buttons to select the channel.
• For channels 10 to 15 press [h10], then the two digits.
OR
Press [PLAY MODE] to select "PRESET".
1
Press [4/REW/ 4] or [3/FF/¢] to select the
2
channel.
FM allocation setting
FM allocation setting
By main unit only
• This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER/BAND].
• After a few seconds the display changes to a fl ashing
2
Continue to hold down [TUNER/BAND].
• When the minimum frequency changes, release the
• After changing the setting, previously preset frequency
station is preset in that channel.
display of the current minimum frequency.
button. To return to the original step, repeat the above
steps.
will be cleared.
11
RQT7923