Axiris MANUELA Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Jam Axiris MANUELA. Axiris MANUELA 7 halaman. Office nixie clock

Installation

Connect the DC plug of the power supply to the DC connector on the back of the clock.

Plug the power supply into a power socket. The clock is now powered on.

Please note there's no ON/OFF switch. To power off the clock remove the power supply

from the power socket and/or disconnect the DC connector from the clock.

After you've powered on the clock, the clock will show the display mode.

When you power off the clock, the clock will remember all settings for approximately 30

minutes. All settings will be lost thereafter, meaning you'll have to set up again after

powering on the clock.

Use the slide switch LED to turn on/off the background lightning.

The meaning of the buttons OPTION/MODE, ALARM/SET and DATE/ADJUST

depends on the clock's current mode.

You can operate the buttons OPTION/MODE and ALARM/SET in two ways:

Push briefly: Push the button and release immediately. This operation is called

▪

pushing the button.

Hold: Push the button for at least one second and release afterwards. This operation

▪

is called holding the button.

User Manual