EasyPet EP-380R Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Produk Perawatan Hewan Peliharaan EasyPet EP-380R. EasyPet EP-380R 19 halaman. Easypet rechargeable multi-dog remote training system

Halaman Cetak

* If the battery inside the collar receiver has been left flat for a long period of time,

the collar receiver might lose the matching code memory. Please charge the collar

receiver and perform the matching-up procedure again.

Caution! Never perform the matching-up procedures while the collar

receiver is on your dog!

Step 5: Test the Collar Receiver

Important: We would recommend you to use warning tone or vibration correction

first before starting the static pulse stimulation. And always start at the lowest

level of stimulation and work your way up.

Please make sure the collar receiver is in fully working order before putting it on

your dog!

Let's take Dog A collar receiver for example:

To test the vibration function, short press the vibration button

transmitter and choose a valid correction level for vibration (from Level 1 to Level 10,

Level 1 is the weakest and Level 10 is the strongest)

Short press button T to send out command to Dog A collar receiver. Dog A collar will

start vibrating for about 2 seconds at the selected level. A green LED light on the

collar receiver should come up during this correction period.

Short press "+" or "–" to adjust the level setting of vibration correction. Short press

button T again to send out the new command. Dog A collar will start vibrating at the

newly selected level. A green LED light on the collar receiver should come up during

this correction period.

Send vibration correction command to collar

receiver:-



Short press vibration button and select a valid

correction level setting



Short press T button and a vibration command

will be sent out to the collar receiver when T

button is released

on the