Axis 23 Petunjuk Produk - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Produk untuk Kamera Keamanan Axis 23. Axis 23 14 halaman. Axis communications network cameras product instructions
Halaman CetakInstalling Axis 231D/232D Camera
1. Install the camera onto the quick release bracket. Loosen
one of the screws on the bottom of the camera, see
diagram below.
2. Place quick release bracket onto the bottom of the
camera, making sure that the (3) locking buttons line up
with the keyhole slots in the Q/R
bracket. Also make sure
the screw that
you loosened
up in the
previous
step lines
up with
the slot
located
next
to the
captive
insert.
3. Turn the camera counter
clockwise.
4. When the locking buttons hit the end of the keyhole slots.
Tighten the locking screw. Then put the camera assembly
aside.
Loosen screw
5. Since the 231D/232D camera operates on 24vac, the
Keyhole slots
power board that is located inside the housing is not
Locking screw
needed. The remove the power board, start by loosening
the screws on the terminal block and disconnect the
Captive insert
orange and red wires.
6. With a Phillips head screwdriver remove the (4) machine
Locking
screws holding the power board to the base bracket.
buttons
- -
Locking screw
Machine screws (4)
Base Bracket