Bion-Tech BTM-3000 Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Penyaringan Air Bion-Tech BTM-3000. Bion-Tech BTM-3000 20 halaman. Super oxide water ionizer batch system

● How to test
With chemical pH reagent packed together, you can judge if the water is super oxide
water or drinking alkaline water
Super oxide water
The concentration of produced water is
various according to the regional water
quality, water temperature, input salt
amount, etc.
※ . As added some salts to produce superoxide water, Cl is created.
. Superoxide water turns to Red when you test them with the reagent to
measure pH concentration, but it showed to Yellow color since contained Chlorine
ingredient decolorize the Red color.
pH level varies from 0 to 14. It indicates concentration of acdic and alkaline water. pH 7 is
neutral, below 7 is acidic and above 7 is alkaline.
● Producing and Preserving the ionized water
Put the plastic container included on the cup saucer and take the ionized water by
pushing the cock lever. Locking the cock lever by pushing it down and up, you can get the
ionized water continuously.
Wash the plastic container with the warm water before using.
If you want to preserve the ionized water, do it in a cold and dark place like in a refrigerator.
Use it up as soon as possible.
Use the Alkaline water at least within 2 or 3 days, Acidic water 3 or 4 weeks.
Do not keep drinking alkaline water and super oxide water together.
Caution
● After producing super oxide water, take the water from the tub and wash it
clean to prevent gasket from being oxidized.
BTM-3000 (영).indd 15
Alkaline water for drinking
The concentration of prooduced water
is various according to the regional
water quality and water temperature, etc.
Throw away 1/3 of a first cup from cock
lever. Drop 1/3 cup of reagent and
then compare
them with a colorimeter.
Test them by additional reagent and it
turns to be light violet or burgundy.
The water is suitable for drink.
MEMO
15
2016-08-25 오후 5:11:51