Axis AXIS 214 Petunjuk Produk - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Produk untuk Kamera Keamanan Axis AXIS 214. Axis AXIS 214 14 halaman. Installation kit
Juga untuk Axis AXIS 214: Petunjuk Pengoperasian (2 halaman)
Halaman CetakInstalling Axis 233 Camera
1. Note the position of the mounting holes on the camera
bracket (see diagram below).
2. Since the 233 camera operates on 24vac, the power
board that is located inside the housing is not needed.
The remove the power board, start by loosening the
screws on the terminal block and disconnect the
orange and red wires.
3. With a Phillips head screwdriver remove the (4) machine
screws holding the power board to the base bracket.
Remove the power board.
Camera Bracket Mounting holes
Mounting holes for housing
Machine screws (4)
Base Bracket
4. Now remove the Base Bracket.
5. Now attach (4) 1" spacers (located in the packet that
came with the housing) to the base bracket.
1"
- 10 -
Attach (4) 1" spacers