EASYPLUG tapHOME Panduan Perangkat & Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Perangkat & Pengoperasian untuk Aksesori EASYPLUG tapHOME. EASYPLUG tapHOME 3 halaman. On-wall power socket – switch adapter

Halaman Cetak

EASYPLUG DEVICE- & OPERATIONS MANUAL

On-Wall Power Socket – Switch Adapter

1. General information about this manual

Before getting started using tapHOME components please read this instruction

carefully and completely. Keep this instruction and pass it on, if you hand your

device to anybody else.

2. Hazard warning

Opening of the device is only allowed by authorized persons and gives the risk of

an electric shock. There's no need to open the device, as there are no components

to be serviced by a consumer. The device is constructed to solely operate indoors

on 230V/50Hz AC supply within fused circuits of max. 16A.The device is designed

for continues operation, it doesn't have an own separator and is power free only

unplugged. For this always make sure the device is easily accessible. Never plug

more devices into each other. Protect the device against water, damp, dust, sun

and other heat radiation.

IMPORTANT:

Please always note the maximum load of 3.000W (1.500W for induc-

tive loads). Applying too high loads can destroy the device and will exclude the

device from warranty. Non-compliance can also lead to accidents and fire.

3. General function of the EASYPlug

The EASYPlug switches connected devices/lamps by Z-Wave

These commands are send by the tapHOME EASYGate (required for operation)

either independently or through a user command utilizing the tapHOME App (more

information on www.taphome.eu).

4. General tapHOME system information

This device is part of the tapHOME home automation system and utilizes a special

radio protocol developed for this kind of application called Z-Wave

Z-Wave

among other things offers a manufacturer independent compatibility and

following substantial features:

Bidirectional communication:

ledged and reconfirmed.

Mesh-Networking:

Single Z-Wave

A command to a device which is too far away or hard to reach will be passed

on by up to 4 devices. The EASYGate arranges to find the best route to the

devices and administrates the according routing table for all devices.

The combination of these features provides a secure, stable and reliable commu-

nication between all devices. All system configurations are made in the tapHOME-

App which executes all functions and operations in conjunction with the EASYGate

connected to the router / switch / access point. Please refer to the tapHOME-App

manual on www.taphome.eu to find out more details about the scalable tapHOME-

App.

5. Operating the EASYPlug

5.1 Operating the device manually

You can operate the following function by pressing the button on the front side of

the device: Switching on/off by pressing and releasing the button.

5.2 Teaching-in the device to the tapHOME system

For teaching-in the device to the tapHOME system please plug the device to a

power socket at the prospective place of operation. This is very important to have

the EASYGate operating the Mesh-Networking function correctly and to prevent

future problems in communication between the devices. Set the tapHOME system

to learning mode according to the tapHOME-App manual (My devices / Attach de-

vices). Press and hold the button on the front side of the device

21). The device will now be recognized within a few seconds and can be used within

the system (after failure please repeat this procedure). Finish the teaching-in proce-

dure by following the instructions of the tapHOME-App. If necessary please consult

the tapHOME App manual or FAQ's at www.tapHOME.eu.

5.3. Special functions of the device within the tapHOME system

The device can be included/excluded into the standard Z-Wave

OFF. By default the device is already included to these scenes. By operating this

scenes through the tapHOME-App all included devices will be switched on/off.

Following settings can be done for every single device in the device screen of the

tapHOME-App:

Enable ALL ON/OFF:

The device is included to the ALL ON/OFF scene

Disable ALL ON/OFF:

The device is excluded from the ALL ON/OFF scene

Disable ALL ON:

The device is only included to the ALL OFF scene

Disable ALL OFF:

The device is only included to the ALL ON scene

In the device screen of the tapHOME App the button of the device can be locked

(additional child protection). By default the button of the device is unlocked.

radio commands.

A command send to the device will be acknow-

devices (like this) also operate as repeater.

for 1 second (count

scenes ALL ON/

The following settings can be done:

Locked:

The button is locked and can't be operated

Unlocked:

The button is unlocked and can be operated

Fast Triple pushes:

The device can be switched by 3 fast pushes to the button

Function of the device LED

The LED behind the device button indicates the following:

The device is on

Off

The device is off

Flashing LED

2x/sec. = teaching-in

3x/sec.=removing device

8x fast= failure teaching-in/removing

7. General note about radio operation

Z-Wave

utilizes the radio frequency of 868.42Mhz for transmitting of commands.

As this frequency can also be used by other systems and despite utilizing the

Z-Wave

technology interferences in operating devices cannot be eliminated at

any time. Electric motors, failure devices, etc. can also give interferences for trans-

missions of radio signals. The reach of the radio signals in between the devices of

30m in buildings and 100m in open air can be significantly reduced through the

structure of buildings (e.g. concrete ceilings and/or walls) or through other environ-

mental influences (e.g. humidity). With the Z-Wave

the tapHOME system offers a perfect solution to overcome this issue and to provide

an enhancement for the reach of the radio signals. Herewith EUROiSTYLE GmbH

declares that the EASYPlug is compliant to the general requirements and other

appropriated regulations of the 1999/5/EC directive. The declaration of conformity

is available under www.tapHOME.eu.

8. Maintenace and cleaning

The EASYPlug doesn't require any maintenance. Repairs should only be carries out

by authorized persons. For cleaning the device please unplug the device from you

power socket. Clean the device with a dry towel only and make sure that no water

is getting inside the device.

9. Technical specifications

Power supply:

Max. load:

Radio frequency:

Range:

Degree of protect:

Protection class:

Disconnecting means:

Pollution degree:

Rated impulse voltage:

The device is constructed to be used at a temperature of 0°C to 35°C and a relative

humidity (rH) of 30-80% (storage at -5°C to 65°C, 10 to 70% rH).

10. Instruction for disposal / CE-sign

Do note dispose this device with domestic waste! Electronic devices are to dispose

according the directive of electronic waste via the local collection point for elec-

tronic waste. The CE-sign is a free trade sign addressed exclusively to the authori-

ties and doesn't warrant any properties.

11. Warranty

For warranty the legal regulations are applied. In case of a warranty claim please

contact the dealer where you have bought the product.

permission of EUROiSTYLE GmbH. We don't take any liability for mistakes of this

documentation, literal/typographic mistakes or technical changes of the device.

This documentation will be regularly reviewed and is available for download on

www.taphome.eu. All trademarks and industrial properties are acknowledged.

EUROiSTYLE GmbH reserves the right for changes as a result of technical improve-

ments.

EUROiSTYLE GmbH, Am Mühlbach 38, 65343 Eltville, Germany

Contact: [email protected] | www.taphome.eu

Mesh-Networking technology

230V / 50Hz AC

3.000W / 1.500W (standard/inductive loads)

868.42 MHz

max. 30 / 100m in buildings/open air

IP20

2.500V