HTC VIVE Tracker (3.0) Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Headset Realitas Virtual HTC VIVE Tracker (3.0). HTC VIVE Tracker (3.0) 10 halaman.

Halaman Cetak
8
VIVE Tracker (3.0)

Pairing VIVE Tracker (3.0)

When you turn VIVE Tracker (3.0) on for the first time, it needs to be paired with the headset or
dongle.
When pairing VIVE Tracker (3.0) with the dongle, make sure the dongle is connected to the
computer. See
Using the dongle
1.
From your computer, open the SteamVR app.
2.
Click
Devices Pair Controller.
If you don't see VIVE Tracker (3.0) in the Controller Pairing window, click I want to pair a
different type of controller HTC Vive Tracker.
3.
Press the Power button for around 2 seconds.
The status light will blink blue.
4.
Wait for the status light to turn green. This means pairing is successful.
5.
In the Controller Pairing window, click Done.
Make sure your play area is clear of obstacles when using VIVE Tracker (3.0) on an object that
needs to be tracked in VR.

Can I use more than one VIVE Tracker (3.0)?

The number of VIVE Tracker (3.0) units that you can use depends on the following:
§ Free USB ports on your computer
§ Number of units supported by VR content
§ Radio frequency (RF) interference

Verifying if VIVE Tracker (3.0) is detected

You can check the SteamVR window to see if it detects VIVE Tracker (3.0).
1.
From your computer, open the SteamVR app.
2.
In the SteamVR window, look for
being tracked.
on page 7.
. This means that VIVE Tracker (3.0) is detected and