HTC 21-S Panduan Pengguna - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur HTC 21-S. HTC 21-S 28 halaman. Digital clamp meter
Halaman Cetakindicator light is green, the screen displays the
resistance.
Diode test
)
1
Press the
the meter. After the self-test is completed, the meter
will display
measurement mode.
)
2
Press button, set the pointer to the "
)
3
Insert the red probe in "INPUT" jack, insert the black
probe in "COM" jack.
4) Touch the diode anode with the red probe, the black
probe contacts the diode cathode.
)
5
Read the measurement result on the screen.
)
6
If the probe polarity is opposite to the diode polarity,
the meter shows "OL", which can be used to
distinguish the anode and cathode.
AC/DC mV measurement
)
1
Press the
the meter. After the self-test is completed, the meter
will display and enter the intelligent measurement
mode.
)
2
Press
the
button to select AC or DC voltage measurement
button to turn on the power supply of
button to turn on the power supply of
button, set the pointer to "mV", and press
and enter the intelligent
13
" position.