Bionaire BCH9208 Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemanas Listrik Bionaire BCH9208. Bionaire BCH9208 10 halaman. Bionaire electric heater user manual
Juga untuk Bionaire BCH9208: Selebaran Instruksi (2 halaman), Selebaran Instruksi (2 halaman)

Halaman Cetak

A S S e M b LY I N S T R u C T I O N S

TeCHNICAL SPeCIFICATIONS

• Amps: 12.5

• Wattage: 1500W (+5% –10%)

• Working voltage: 120V AC/60Hz

ASSeMbLY INSTRuCTIONS

NOTe: A Phillips screwdriver is required for assembly.

Unpack your heater from the box, being careful to

remove all parts from plastic bags and remaining

packaging. Please save the carton for off-season storage.

Your heater is packed with separate base in the box.

Carefully remove all parts from plastic bags. To prevent

scratches, place all parts onto a cloth before assembly.

Follow the below instructions for Base assembly:

base Assembly

Step 1:

Run the power cord through the center of the

base. To assemble the base to the unit, first

make sure the side marked "Rear" is facing

the back of the heater. Line up holes of the

base with holes of the heater bottom, and

secure with 4 provided screws. Refer to Figure

Step 2:

Lace the power cord through the cord minders

on the underside of the base. Refer to Figure 2.

Step 3:

Turn the heater right side up on a flat level

surface prior to beginning operation.

Figure 1

Figure 2

Remote Control

Unpack the remote control from box. This includes one

lithium battery, CR2025/3V. Please note this remote

control will not work through walls. Remove battery

before discarding the remote.

NOTe: REMOVE THE PROTECTIVE COVER FROM THE

BATTERY PRIOR TO BEGINNING OPERATION.