EasyRobotics PROFEEDER X Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Robotika EasyRobotics PROFEEDER X. EasyRobotics PROFEEDER X 16 halaman.
Halaman Cetak
5 Using the ProFeeder X
5.1 General
Do not have more than one drawer out on each side.
5.2 ProFeeder X - Airlock
The Airlock-system must be connected to the mounted robot. The system uses
ModBos TCP and must be connected through the included RJ45 cable.
The system must be controlled by the mounted button, which must be connected to
the robot and programmed so that the buttons can activate the valve and thereby
releasing the tray. And vice versa when the tray is reloaded. The light must be
programmed as below:
Light
5.3 ProFeeder X – Mechlock
When the Profeeder X is setup with the Mechanical lock, calibrate the spring
plungers before using the cell.
Revision: 2020-08
EasyRobotics ApS
Blinking Light
Status:
Action needed:
Light constantly on
Status:
Action needed:
Light off
Status:
Action needed:
ProFeeder X User-Manual (en)
Status
Tray is currently being worked on.
No
Tray is done.
Reload tray or parts. Press button to
reset.
Tray has not been worked on yet.
No
Page 9 of 15