Alpha Fan ALLY-5B/56 Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kipas angin Alpha Fan ALLY-5B/56. Alpha Fan ALLY-5B/56 8 halaman.

Step 6

a. Install the LED Light Kit on Motor with Light Kit Screw.

b. Install Lamp Shade by twisting in clockwise.

Step 7

Below shows a complete installation diagram

IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER

SWITCH OR REGULATOR.

The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using

1 transmitter, the below steps are required.

DO NOT PRESS ANY OTHER BUTTON DURING THIS PROCESS

Step 1

a) Insert the 2 pcs of batteries (provided) into transmitter.

b) Turn on the power supply (wall switch) to the fan.

c) Within 30 sec, press and hold the "LEARN" button for 3 sec. Once the receiver has detected the frequency,

transmitter will "Beep Beep" twice. Programming process is completed and fan is ready to use.

If the fan is not responding to the transmitter, repeat Step 1b.

Learn

Press and hold

for 3 sec

Transmitter