Epcom EP20-TB-2600 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Epcom EP20-TB-2600. Epcom EP20-TB-2600 12 halaman. Triple band signal amplifier

and Strength (options depends on different phone models)

2) The installation site of the indoor antenna should be in the central of the weak signal zones

that you want to amplify the signal. The distance between outdoor and indoor antennas is at

least 5 mts vertical or 10 mts horizontal.

3) Find a suitable site for the amplifier(better a solid wall), according to the installation

requirements and dimension of the amplifier.

Estimate and mark the sites for installation holes of U-shaped back holder. Drill holes with

the impact drill. Sizes of holes are 7mm. The expected sites are as follow: (unit: mm)

3) Put the expansion plug(size: 8mm) into the 4 drilled holes.

4) As shown in the figure, align the fixing holes of the U-shaped back holder with

corresponding holes on the wall. Then drive 4 pcs of M6*40 screws into the expand plugs

with screwdriver. Finally, hang the amplifier firmly on the U-shaped back holder.