Epcom PROAUDIO SF-2240UC Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penguat Epcom PROAUDIO SF-2240UC. Epcom PROAUDIO SF-2240UC 20 halaman. Class d power amplifier

Halaman Cetak

2. GENERAL DESCRIPTION

The new series of digital mixer amplifiers are more efficient and a cost-effective solution specially

developed to meet the needs of the global market. It is suitable for commercial audio installations.

Just to meet the needs of emerging markets to provide high-quality equipment at an affordable

price, the UC series mixer amplifiers are equipped with 4R and 100V two-way outputs and a series

of convenient functions, which are flexible and applicable worldwide. The series combines many

convenient and flexible functions, including Bluetooth and USB media player; low impedance

function (4ohm/8ohm) and high impedance output (100V); each output channel is equipped with

a separate bass and treble control.

3. FEATURES

1. 2 channels output, 120W constant impedance or constant voltage high performance

digital mixer amplifier (4-16R/100V).

2. Built-in MP3 recording function.

3. 6-channel independent volume control.

4. The 6-channel audio source can be configured as a matrix to each channel output.

5. INPUT1-4 input with adjustable gain control.

6. The 2 outputs are with independent volume control.

7. Remote microphone input, max can be 2 remote microphones.

8. Built-in MP3 (U disk/SD card) player function.

9. Built-in FM radio function.

10. With high-end TFT display.

11. 2 outputs can remotely control the panel to adjust the circuit.

12. There are distortion, protection, signal, output status indicators.

13. INPUT1-4 channels can be configured with phantom power.

14. INPUT1-4 channels have priority and mixing selection function.

15. Priority input port for EMC alarm.

16. ALARM interface plays the specified alarm music.

17. Built-in Bluetooth function, can be connected to mobile phone/computer, with external high-

gain Bluetooth antenna.

18. 2 mute interfaces can be connected to the fire control interface.

19. Priority: EMC >MUTE >REMOTE MIC >INPUT1-4 >LINE1-2.