Alpha Moisture Systems SADPmini Logger Buku Petunjuk - Halaman 14
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perangkat lunak Alpha Moisture Systems SADPmini Logger. Alpha Moisture Systems SADPmini Logger 14 halaman.
Halaman Cetak
Block Selector buttons:
The 2 small buttons located at the top left hand side of the Block Indicators are used to
select the data block to be graphed. The blue LED signifies the data block that is
currently plotted. The block selector buttons move the selected block up or down.
Note: Only blocks containing data can be selected for graphing
Exit button:
This control returns the PC software to the Main screen (See section 6.1.3)
6.5 Disabling Pop-ups
To disable the information pop-up screens simply select the 'Disable Pop-up' radio button on
the Splash screen (see section 6.1.1). This will prevent the information panels from
appearing. It is recommended that this process is not used until the user is completely
confident with the physical operation of the SADPmini logging software and the Model
SADPmini.
The screens disabled are:
Initial Pop-up Screen (see section 6.1.2).
Export DATA Pop-up Screen (see section 6.2.1).
External LOG Pop-up Screen (see section 6.3.1).
The pop-up screens can be re-enabled at any time by de-selecting the radio button on the
splash screen (see section 6.1.1).
7 Cables and Interfaces
There are 2 types of interface that can be used with the SADPmini and SADPmini Logging
software.
7.1 RS232 to RS485 Interface
The Interface unit INT007 has two 9-way 'D' type connectors. The connector marked
with a 'B' connects to a PC or Laptop serial Port using a 2.0m serial cable (Part No:
CAB029). The connector marked with a 'S' connects to the SADPmini using a 1m
special cable (Part No: CAB032).
7.2 USB to RS485 Interface
The Interface unit INT008 has a 9-way 'D' type connector and a USB connector. The
USB connects to a PC or Laptop USB Port using a 1.8m USB cable (Part No:
CAB031). The 'D' type connects to the SADPmini using a 1m special cable (Part No:
CAB033).
Note: The drivers for the USB Interface are supplied on the included CD.
Page 10 of 10