Epever IPower IP2000-42 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Inverter Epever IPower IP2000-42. Epever IPower IP2000-42 20 halaman. Pure sine wave inverter

Halaman Cetak

Epever IPower IP2000-42 Panduan Pengguna

Operation Steps:

Step 1: Turn off the switch of inverter

Step 2: Connect the battery ('+' terminal with red line, '-'with black

line). Do not connect them by contraries, or the power inverter will

be damaged.

Step 3: Connect the protective grounding to the ground

Step 4: Connect the AC load to the AC outlet

Step 5: Switch on the fuse or breaker. Switch the inverter to ON

and then turn on the loads one by one. Check the operation state of

both power inverter and loads. 'Green' of the Working indicator

means the state is normal.

Step 6: If there are different loads, it is suggested that turn on the

load with large startup current first, such as television, then turn on

the load such as lamp when the inverter works stably.

Step 7: If the Fault indicator is 'Red' and the buzzer alarms or no

output when you turn on devices, switch off the loads and

power inverter immediately. Check the system by referring to the

troubleshooting guide. Turn on the devices again according to the

operation methods after the failure is removed.