Epever LS1012E Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Inverter Epever LS1012E. Epever LS1012E 20 halaman. Solar charge controller
Juga untuk Epever LS1012E: Manual (2 halaman)
Halaman Cetak
4.2 Setting Operation
Load Work Mode Setting
When the controller is powered on, press the setting button to control
the load output. Press the button once, the ON/OFF status will be
changed corresponding.
Battery Type Setting
Press the setting button for more than 5 seconds, battery indicator
LED1, LED2, LED3 will be flashing correspondingly. Then press the
setting button to choose Sealed, Gel, and Flooded battery type, when
you finish choosing, stop pressing the button, the setting is finished till
the digital tube stop flashing. The parameters indicated are shown
below:
Battery type selection
LED1
○
○
○
"○"LED indicator on
LED2
LED3
×
○
○
×
Sealed lead acid battery
×
○
"×"LED indicator off
7
Table4-4
Battery type
Gel battery
Flooded battery