Epever LS1024EPD Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Inverter Epever LS1024EPD. Epever LS1024EPD 2 halaman. Solar charge controller
Juga untuk Epever LS1024EPD: Panduan Memulai Cepat (2 halaman)

Halaman Cetak

 Load mode

● Manual Control：Control the load via the button.

●Light ON/OFF

Note: In the mode of Light ON/OFF and Light ON/Timer, the Load is turned on after

10Min. delay.

● Test Mode (Default)：Test Mode is as same as Light Control Mode but no delay.

 The correspondence table of Load Work Mode & LED digital tube value

Value

Working mode

Light ON/OFF

Light ON + 1 hours

Light ON + 2hours

Light ON + 3hours

Light ON + 4 hours

Light ON + 5 hours

Light ON + 6 hours

Light ON + 7 hours

4. Troubleshooting

Faults

Possible reasons

Charging LED indicator

off during daytime

PV array

when sunshine falls on

disconnection

PV modules properly

Battery voltage

higher than over

Charging Status LED

voltage

indicator fast flashing

disconnect

voltage

Battery LED indicators

Battery over

red color and loads not

discharged

working

●Light ON + Timer

Value

Working mode

Light ON + 8 hours

Light ON + 9 hours

Light ON + 10 hours

Light ON + 11 hours

Light ON + 12 hours

Light ON + 13 hours

Manual Control

Test Mode

Troubleshooting

Check that PV and battery wire

connections are correct and tight

1. Disconnect the solar array and

measure the battery voltage whether is

too high; 2. Change the controller; 3.

Change the battery

The controller cut off the output

automatically. LED indicator will return to

green automatically when fully

The radix point of

digital tube fast

Short circuit

flashing and load not

working

The radix point of

digital tube slowly

Over load

flashing and load not

working

6. Technical Specifications

Item

LS1012EPD

Nominal system voltage

12VDC

Max. PV input voltage

30V

Rated current

10A

Equalize Voltage

Boost Voltage

Float Voltage

Low Voltage Reconnect

Voltage

Low Voltage Disconnect

Voltage

Self-consumption

Temperature

compensation coefficient

Working temperature

Enclosure

Overall dimension

Mounting dimension

Mounting hole size

Power cable

Net weight

Any changes without prior notice!

Clear short circuit. It is reactivated after

delayed 10 seconds for the first time, If

over 1 time，press the key to clear error

and the controller will resume to work

after 3s or restart the controller

Please reduce the number of electric

equipments.

When load power reaches 1.25-1.5

times, 1.5-2 times and 2 times more than

nominal value, controller will

automatically close loads in 60 seconds,

5 seconds and 1 second, respectively.

Please press the key to clear error and

the controller will resume to work after 3s

or restart the controller

LS1024EPD

LS2024EPD

12/24VDC Auto

50V

10A

14.8V(12V);29.6V(24V)

14.4V(12V);28.8V(24V)

13.7V(12V);27.4V(24V)

12.6V(12V);25.2V(24V)

11.2V(12V);22.4V(24V)

12V：≤4.58mA；24V：≤6.01mA

-5mV/℃/2V（25℃）

-35℃～+55℃

IP67

108.5mm×75mm×25.6mm

100.5mm

Φ5

PV/BAT/LOAD:4.0mm

PV/BAT/LOAD:6.0mm

408g

410g

Version number:V1.1

50V

20A

435g