Alpha Professional Tools WBCKIT Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemotong Alpha Professional Tools WBCKIT. Alpha Professional Tools WBCKIT 8 halaman. Wet blade cutting kit

Halaman Cetak

INSTALLATION OF WBCKIT GUARD

Note: It is important to securely attach the
WBCKIT to the tool.
1.
Before tightening, slide the protective cover
onto clamping collar so that the lip on the
protective cover fi ts into the groove on the
tool.
2.
Position the protective cover with the
shield facing backwards. Push down
until the protective cover is fi rmly seated
on the clamping collar.
3.
Tighten the clamping screw to a snug fi t.
The protective cover should not be able
to move.
4.
Take one end of the water line and insert
into the "push to connect" side of the 90
degree swivel fi tting.
5.
Push tubing until it contacts the bottom of
the fi tting. Pull back slightly on the tubing
to ensure correct engagement.
Note: Tubing should not pull out from
fi tting.
6.
To release tubing from fitting, push
tubing inward, push down on the release
collar and then pull tubing free from
connection.
Release
Collar
Groove
5