Epever SHI3000 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Inverter Epever SHI3000. Epever SHI3000 20 halaman. Shi series pure sine wave inverter

Note：1.When the load current is less than 10A, use "AC outlet ①"

or "AC outlet ②"; If the load current is greater than 10A, must use

"AC outlet ②".

2.The cross section of wire should not be more than 4mm

, and it

is recommended to use stranded wire, when using " AC outlet ②".

3.Stop inverter working firstly, insert a sharp tool to the " AC outlet

②" at the top of the holes and then remove the wire.

 The Optional Outlet

Australia/New Zealand

European