EPH Controls R37-RF Petunjuk Pengoperasian

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Motherboard EPH Controls R37-RF. EPH Controls R37-RF 2 halaman. 3 zone rf programmer
Juga untuk EPH Controls R37-RF: Petunjuk Pengoperasian (2 halaman)

Halaman Cetak

EPH Controls R37-RF Petunjuk Pengoperasian

R37-RF - 3 Zone RF Programmer

Contents

Factory default settings

Factory program settings

Resetting the programmer

Setting the date and time

ON/OFF period selection

Adjusting the program settings

Reviewing the program settings

Boost function

Advance function

10. Holiday mode

11. Connect RF thermostat with the programmer

12. Disconnect RF thermostat from the programmer

13. Backlight mode selection

14. Keypad lock and unlock

15. Copy function

16. Frost protection

17. Master reset

1. Factory default settings

Program:

5/2D

Backlight:

Keypad:

Unlocked

Frost Protection:

2. Factory program settings

P1 ON

P1 OFF

Mon-Fri

Sat-Sun

7:30

10:00

All 7 days

P1 ON

P1 OFF

Everyday

P1 ON

P1 OFF

3. Resetting the programmer

It is necessary to press the RESET button prior to initial programming.

This button is located behind the cover on the front of the unit.

4. Setting the date and time

Lower the cover on the front of the unit.

Move the selector switch to the CLOCK SET position.

Press the

buttons to select the day.

Press the

buttons to select the month.

Press the

buttons to select the year.

Press the

buttons to select the hour.

Press the

buttons to select the minute.

Press the

buttons to select 5/2D, 7D or 24H

The date, time and function are now set. Move the selector switch to the

RUN position to run the program, or to the PROG SET position to change

the program setting.

5. ON/OFF period selection

There are 4 modes available on this programmer for users to choose for their

individual application.

Important: Keep this document

This 3 zone RF programmer is designed to

provide ON/OFF control for 3 zones, with

the value added application of in built

frost protection.

5/2D

P2 ON

P2 OFF

P3 ON

P3 OFF

12:00

17:00

P2 ON

P2 OFF

P3 ON

P3 OFF

24H

P2 ON

P2 OFF

P3 ON

P3 OFF

RUN

CLOCK

PROG

SET

Press

EPH Controls Ireland

Sitecast Industrial Estate, Pouladu ,

Cork, T12 W665, Ireland

[email protected] www.ephcontrols.com

5. ON/OFF period selection

AUTO

The programmer operates 3 'ON/OFF' periods per day.

ALL DAY The programmer operates 1'ON/OFF' period per day.

This operates from the rst ON time to the third OFF time.

The programmer is permanently on. **ON**

OFF

The programmer is permanently o . **OFF**

Lower the cover on the front of the unit. By pressing the

you can change between AUTO / ALL DAY / ON / OFF for Zone 1.

Repeat this process for Zone 2 by pressing the

Zone 3 by pressing the

23:00

6. Adjusting the program settings

Lower the cover on the front of the unit. Move the selector switch to the

PROG SET position. You can now program zone 1.

Press the

Repeat this process to adjust the ON & OFF times for P2 & P3.

Press

When completed, move the selector switch to the RUN position.

7. Reviewing the program settings

Lower the cover on the front of the unit.

Move the selector switch to the PROG SET position.

By pressing

Zone 1.

Press

When completed, move the selector switch to the RUN position.

8. Boost function

This function allows the user to extend the ON period for 1, 2 or 3 hours.

If the zone that you wish to Boost is timed to be OFF, you have the facility to

switch it ON for 1, 2 or 3 hours.

Press the required button,

- once, twice or three times respectively.

To cancel the boost function, simply press the respective boost button again.

EPH Controls UK

Unit E4, Welland Business Park, Valley Way, Market Harborough,

Leicestershire, LE16 7PS, United Kingdom

[email protected] www.ephcontrols.co.uk

Page 1 of 2

Operating Instructions

CAUTION!

Before commencing, disconnect the

device from the mains. There are parts that

carry mains voltage behind the cover. Never

leave unsupervised when it is open. (Prevent

non specialists and especially children from

gaining access to it.)

Never remove this product from the

electrical baseplate. Disconnect from mains

supply in the event of any damage to any

buttons. Do not use sharp tools to push any

button.

(Continued)

button.

buttons to adjust the P1 ON time.

buttons to adjust the P1 OFF time.

and repeat the above process to adjust for Zone2.

and repeat the above process to adjust for Zone3.

this will review each of the ON/OFF times for P1 to P3 for

and repeat the above process to adjust for Zone 2.

and repeat the above process to adjust for Zone 3.

ZONE

for Zone 1,

for Zone 2 and

Boost

button,

button and for

RUN

CLOCK

PROG

SET

Press

RUN

CLOCK

PROG

SET

ZONE

for Zone 3.

Boost