Axis Axis Camera Families for Autodesk Revit Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Kamera Digital Axis Axis Camera Families for Autodesk Revit. Axis Axis Camera Families for Autodesk Revit 13 halaman. Camera families for autodesk revit
Halaman Cetak3.2 instance Properties
Once a camera has been placed into a Revit project, the instance properties listed below are available.
See also Adjusting the field of view visualization below.
Constraints
Controls the camera tilt or, for dome cameras,
FOV Tilt
the field of view
Rotates the camera or, for dome cameras, the
FOV Pan
field of view
FOV Distance to
Horizontal cut off distance for the field of
object
view visualization
The field of view visualization is cut off at
FOV Upper limit
this distance above the top of the camera
The field of view visualization is cut off at this
FOV Bottom limit
distance below the camera insertion point
Offset
Offset from floor level
Graphics
Target resolution
Unit for FOV Target Resolution setting. Pixels
units
per meter or foot.
FOV Target
Resolution in pixels per meter or foot for
resolution
resolution guide.
FOV Desired focal
The focal length chosen for the camera
length
FOV Actual focal
The focal length used – limited to the focal
lenght
length range supported by the camera
Text
Target area
Camera target area
Dimensions
Pendant status
For pendant mounts this message shows if
message
the pendant length is within limits
Pendant lenght
For pendant mounts, the pendant length
Identity data
Network port
Network Port Information
Comments
Comments
Visibility
Show field of view Turns the field of view visualization on or off
5